Subject: Newman's Machine V1.4 : A COOLING effect has been observed.
Hi All,
The entropy changes while the Machine runs, a COOLING effect has been observed...
Today, I have conducted a new test about my Newman's machine V1.4. The purpose of this test is to check some eventual changes in the entropy of the Newman Machine.
I have used a dual probes digital thermometer (resolution 0.1 degrees):
- The first temperature probe has been used as reference for the lab temp (21.5 degrees)
- The second temperature probe has been glued directly on the Newman coil. I have waited one hour before starting the test for equalizing the temperature (LabTemp = 21.5 degrees, Coil Temp = 21.5 degrees)
The test has been conducted during one hour.
Time (mn) Temp (degrees)
00 .................. 21.5
05 .................. 21.5
10 .................. 21.4
15 .................. 21.3
20 .................. 21.3
25 .................. 21.3
30 .................. 21.3
35 .................. 21.3
40 .................. 21.3
45 .................. 21.3
50 .................. 21.3
55 .................. 21.3
60 .................. 21.3
The Newman machine has been stopped after the test (a 60 mn run) and 15 mn after the temperature has been EQUALIZED AGAIN at 21.5 degrees. This confirm the cooling effect observed in spite of the mechanical work generated and the joules' effect dissipated in the coil.
The rotation speed was 286 RPM and the coil voltage used 626 V. The differential voltages I/O measured on the "current control flow bridge" was 32V (Input) and 88V (Output) across the 2uF cap with my new fast HV diodes.
Sincerely,
Jean-Louis Naudin
(French researcher who independently constructed a Newman-type Energy Machine)
E-mail: josephnewman@earthlink.net